|
|
|
|
|
|
|
|
|
|
|
|
|
Benjamin's Best High Speed Steel 1/2" x 1/8" Parting Tool - 12"Long. The parting tool is specifically designed for cutting, off or "parting" a spindle workpiece. Also used to cut tenons, establish a diameter or cut small flat areas.
|
Benjamin's Best High Speed Steel 3/4" x 1/8" Parting Tool - 16-1/2"Long. The parting tool is specifically designed for cutting, off or "parting" a spindle workpiece. Also used to cut tenons, establish a diameter or cut small flat areas.
|
Benjamin's Best High Speed Steel 3/4" x 3/16" Parting Tool - 16-1/2"Long. The parting tool is specifically designed for cutting, off or "parting" a spindle workpiece. Also used to cut tenons, establish a diameter or cut small flat areas. The benefit of the diamond cross-section is that the friction is significantly reduced, making for both easier control and reduced heat build-up. This is important when parting Hardwoods which can crack if overheated.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Benjamin's Best High Speed Steel Tenon tool. This tool is only 1/16" wide. It gives a clean, sharp and accurate 90 degree angle with a very thin cut. Ideal for small delicate turnings. A must for any pen maker - ideal for cutting tenons on pen center bands. Blade is 1-1/4"wide x 5" long. 9" overall.
|
Set of 3 Benjamin's Best High Speed Steel Parting Tools. The parting tool is specifically designed for cutting, off or "parting" a spindle workpiece. Also used to cut tenons, establish a diameter or cut small flat areas. This set gives a versatile selection for light to heavy work. Includes Models LX410, LX420, LX430
|
|
|
