|
|
|
|
|
|
|
|
|
|
|
|
|
24kt BallBearing Yo-Yo Kit
|
The most popular yo-yo's these days have a ball bearing spindle instead of a fixed wood or metal post. Yo-yo's with a ball bearing spindle spin longer, sleep better and make it easier to perform complicated tricks. PSI spent nearly a year designing, testing, and perfecting this kit. The result is a yo-yo that works superbly and is easy to make. This project is made by turning the yo-yo sides on a 7mm pen mandrel using any style 10mm bushing setvStart with 5/8" thick wood for best results.
|
No lathe required!
Cut this yo-yo half (style #1) profile on a drill press. Install a cutter into your drill press and turn flat stock 5/8" thick into yo-yo halves with 10mm holes. The blanks you cut will work perfectly with PSI's Yo-Yo Kit components. PSI's profiled carbide cutters cut aggressively, accurately, and provide a smooth finish to your wooden yo-yo halves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No lathe required!
Cut this yo-yo half (style #2) profile on a drill press. Install a cutter into your drill press and turn flat stock 5/8" thick into yo-yo halves with 10mm holes. The blanks you cut will work perfectly with PSI's Yo-Yo Kit components. PSI's profiled carbide cutters cut aggressively, accurately, and provide a smooth finish to your wooden yo-yo halves.
|
No lathe required - Set of 2 Yo-Yo Profile Cutters!
Cut profiles on a drill press. Install a cutter into your drill press and turn flat stock 5/8" thick into yo-yo halves with 10mm holes. The blanks you cut will work perfectly with PSI's Yo-Yo Kit components. PSI's profiled carbide cutters cut aggressively, accurately, and provide a smooth finish to your wooden yo-yo halves. Set Includes 2 profile cutters, style #1 and style #2.
|
|
|
